Description
Transtar 2in1 Primer Grey Spraycan/Aerosol 4603 400g, Automotive Paint, Touch Up
2 in 1 Primers are a specialty coating designed for easy and convenient priming of metal and plastic parts.
These primers help prevent rust and seal out moisture, while providing a smooth base for topcoat application on metal substrates.
2 in 1 Primers also have excellent flexibility and adhesion properties that enable them to be applied to flexible and rigid parts.
2 in 1 Primers are fast drying, provide superior fill and build, and are easy to sand.
They are compatible with virtually all automotive paints.
Key Features of the Transtar 2 in 1 Primer:
- Suitable for metal and plastic parts: you can use it on a variety of objects
- High resistance to corrosion: reduces the formation of rust
- Provides an extremely smooth base on metal substrates: allowing you to apply a perfect topcoat
- Flexible, with strong adhesive properties: can be applied to flexible and rigid parts
- Quick drying: reduces the time it takes to finish a project
- Provides excellent fill and build and is easy to sand
- Compatible with almost all automotive paints on the market
FLASH TIMES/DRY TIMES
Flash Time: 5-10 minutes
Dry to Sand: 15-20 minutes
SURFACE PREPARATION
Clean with Wax & Grease Remover and wipe completely dry. Sand substrate with 240grit paper and mask off repair area.
APPLICATION
- Shake can well.
- Hold can upright 8 – 12 inches from surface to be primed.
- Apply 2 – 3 medium wet coats, allowing 5-10 minutes of flash time between coats.
- Allow to dry for 15 – 20 minutes before sanding.
- Sand with 320-400 (dry) or 500-600 (wet) grit sandpaper until a smooth surface is attained.
- Reclean with wax and grease remover, wipe area with a tack cloth and apply top coat paint per manufacturers instructions.
Approximate Coverage: 432 ft2/gal @ 1 mil
Reviews
There are no reviews yet.