KS-4000 is a water-based stone chip protection. It is a very high quality protection for under-body treatment and all types of car body panels. KS-4000 has a very good adhesion to all surfaces and is rapidly overpaintable with all kind of paint systems. KS-4000 is solvent-resistant. When applying 2 comp., base coat or water based lacquers the surface must be primed with CS Kunststoff-Haftvermittler-SPRAY ML400 and allowed to flash off/dry before painting.KS-4000 is a long-lasting stone chip protection for all car body panels like spoilers and doors. KS-4000 protects door sills, engine bonnets and the under-body against corrosion. It can also be used on PVC.

CHARACTERISTICS: KS – 4000 is an environmental friendly, water based protective anti-gravel coating with sound deadening and anti-corrosion properties. The product contains 0% VOC. After drying KS – 4000 can be painted over with all conventional 2K-acryllic and basecoat lacquers and also water based lacquers. After the product has completely dried remains a very elastic film that offers a good protection against various climates, and which is sand able.

APPLICATION : KS – 4000 is applied as an anti corrosion and anti gravel coating on clean cold-rolled steel, clean galvanised steel, sand aluminium or sanded 2K primers of metal parts for instance on spoilers and side-skirts of cars, trucks and coaches. Because of the sound-deadening properties KS – 4000 can also be applied in the wheel-housings. Applicable in: – Automotive industry – Coach works – Garages, workshops – Body repair shops – Bus construction

PROCESSING: Shake before use. The surfaces to be treated must be dry, rust- and grease free. Spray the coating on the surfaces to be treated with a hand- and pressure gun with an air-pressure of 4 till 6 bar. The optimal spraying distance is approximately 20-30 cm. The product dries a room temperature. For a quicker drying it is possible to apply ovenor IR drying at a maximum temperature of +60°C after a let down of the wet film for about 10 minutes. KS – 4000 is overpaintable after 1 – 2 hours (dried at 20°C) with all conventional solvent based and solvent free lacquer systems. The product can be sprayed haze free without any cob webbing and does not drip. Contaminated surfaces and filthy equipment can be simply cleaned in “fresh” condition with hot water. Before overpainting with synthetic resin based lacquers the surface must be allowed to dry completely. When applying 2 comp., base coat or water based lacquers the surface must be primed with CS Kunststoff-Haftvermittler-SPRAY ML400 and allowed to flash off/dry before painting.