3D Super Glass Cleaner Ultra Concentrated 50:1 Industrial Strength 3.8LT. 9001

Description

3D Super Glass Cleaner Ultra Concentrated 50:1 Industrial Strength 3.8. 9001. Automotive Paints

 

What is it?

Super, hyper-concentrated glass cleaner that uses the highest quality, complex ingredients to create the best performing glass cleaner.  3D’s proprietary homogeneous distillation process refines the key ingredients down to a pure, highly spun concentrate while removing approximately 95% of the water found in other glass cleaners.

 

What does it do?

It cleans glass streak and smudge free assuming you use clean, uncontaminated glass towels.  See the supplemental information below for what makes a great glass cleaner and for what makes great glass cleaning towels.

 

When do you use it?

Anytime you have dirty glass or glass with some kind of oily film that’s blocking your view or creating haze or glare when you drive.  Anytime around the home, office, shop, rv, etc. when you need to clean glass and restore streak-free, smudge-free clarity.

 

Mixing product

Pre-mix 7.5 teaspoons or 2.5 tablespoons of Super Glass Cleaner to a 32-ounce spray bottle with approximately 30-ounces of distilled water and mix well.

 

For exterior glass

Step 1: Spray glass cleaner directly onto glass.  Allow to dwell for 15 to 30 seconds so it can go to work breaking down dirt and traffic film.

Step 2:  Using a clean, soft microfiber glass towel, spread the product over the surface and then wipe the residue off.

Step 3:  Fold or flip to an un-used side of the same towel or switch to a fresh, clean dry microfiber glass cleaning towel and give this section of glass a final wipe to ensure streak-free results.

 

Important:  Once all sides of a towel have been used, place the towel in a clean container or laundry hamper for washing, drying, and storing afterwards.

 

Pro Tip:  For Step 2, mist a tiny amount of glass cleaner directly onto the section of towel you’ll be using to make the final wipe over the glass.  This tiny mist when it comes into contact with any residual glass cleaner or film still on the glass will re-liquify it and as you make this final wipe or pass, you’ll remove everything still remaining on the glass at this time.

 

For interior glass

Step 1: To avoid getting glass cleaner overspray onto nearby surfaces like the dash, door panels, rear deck, etc., instead of spraying the glass cleaner directly onto the glass – spray the glass cleaner onto your microfiber glass cleaning towel.  Take this dampened portion of your glass cleaning towel and wipe the glass, or in the case of a windshield or back window, wipe half of the area, covering and spreading the glass cleaner over this section of glass.

Step 2: Immediately, while the glass cleaner residue is still wet on the surface, fold, or flip to an un-used side of the same towel or switch to a fresh, clean dry microfiber glass cleaning towel and give this section of glass a final wipe to ensure streak-free results.

Pro Tip:  For Step 2, mist a tiny amount of glass cleaner directly onto the section of towel you’ll be using to make the final wipe over the glass.  This tiny mist when it comes into contact with any residual glass cleaner or film still on the glass will re-liquify it and as you make this final wipe or pass, you’ll remove everything still remaining on the glass at this time.

 

2 secrets to cleaning glass

There are 2 secrets to cleaning glass streak-free and without any smudges that professional detailers, janitors, commercial window cleaners, house cleaners and house cleaning companies all around the world know and practice.

1:  You need a great glass cleaner.

2: You need lots of quality clean, uncontaminated glass cleaning towels.

1: A great glass cleaner